Centre Pivot Irrigation System (Fixed)

The advantage of the center pivot is that it takes less labor and water to irrigate 13-130ha from one water feeding point. Our heavy duty design allows for up to 11 spans (650m) with angles and bolt pivot anchors strong enough to withstand high winds.

Centre Pivot Irrigation System (Towable)

The towable center pivot allows farmers to manually move the irrigation system in the field. The direction of the mobile pivot may change while it is working or being towed. When towing, lock the tire position so you have more control.

Lateral Move System (Ditch Feed)

With lateral move irrigation systems that use ditch feeds as a water source, there are two ways to build the ditch-with cement bricks or geomembranes. In a lateral move center, water is piped from the ditch to the sprinkler. Pump and diesel engines are installed on the center pivot's cart.

Lateral Move System (Hose Feed)

A lateral move system using a hose feed works in a linear movement to irrigate a rectangular area. Water is fed to the irrigation system by a flexible hose attached to the machine. The size of the hose is 6’ and 8’. The length can stretch from 1 span to 7 spans.

Stainless Steel Centre Pivot System

Rainfine's mobile irrigation systems consist of drivable mobile pivots and wheeled spans. With this irrigation solution, the process of irrigating becomes much simpler in that only one person is needed to work the pivot. In addition, the irrigation machinery can move to any place that you want as driven by motors and great pivot tires.

Floating Pump Station

Because of the extremely high cost of investment for traditional pump stations, the government is the primary source of funds.
If the government cannot build these pump stations, the people living in these areas sometimes suffer greatly as a result.

Chemical Injection Pump

The chemical injection pump, or called chemical dosing pump can transport chemicals that are high-viscosity, corrosive or dangerous. The chemical injection pump prevents back flow and leaking when water pressure is low.

Irrigation Filter

The irrigation filter system is specially designed for center pivots. The mesh number and size all meet standard international requirements. Finely crafted in our workshop, the drip irrigation filter is galvanized with ASTM A 123/123m-02 and leaving no residual dross.

Heavy Duty Gear Boxes

Our heavy duty gearbox is specially designed for warm climates where irrigation is needed more than 300 days per year.

The output shaft of this center pivot part has a 2-1/4" diameter.

Gear Motor

Rainfine’s center pivots move thanks to our electric gear motors, as indispensable irrigation components. These high quality worm gear motors are made to have a long service life.

Diesel Generators

Our diesel generators include a manual control panel and several safety guards. They can run 8 to 10 hours on one tank of fuel.

Pivot Tires

Aside from the standard pneumatic (air-filled) tires, we also offer a heavy-duty non-pneumatic tire. Pivot tire segments are made using high quality rubber with superior quality UV resistant material added, and a
10×38” standard galvanized rim.

Auto Reverse and Stop System

Due to the terrain, barns and houses, or other obstacles, the pivot system may not be able to make a full circle. The auto reverse and stop system automatically makes the pivot stop and reverse when encountering such obstacles. If any of the towers runs into an obstacle the automatic pivot system will stop to avoid collision.

Irrigation Pipe

Each of our sprinkler parts use hot dip galvanized steel, made in one of China’s leading galvanizing workshops. Our irrigation pipes have a thickness of 3mm, which is higher than the U.S.’s 2.0 - 2.5mm standard of pivot manufacturers according to ASTM A 123/123m-02.

Goose Neck (Hot Dip Galvanized Steel)

We make durable and long lasting pipe fittings and pipe drill processing systems using galvanized steel pipes. This technology givesgooseneck pipes a strong connection to pipe outlets, reducing any damage to the gooseneck when the sprinklers vibrate.

Angle and Truss Rod (Hot Dip Galvanized Steel)

The truss design is the most important part of pivot irrigation systems.
This truss rod can withstand 60,000psi. We use 22mm diameter rods instead of 19mm, making our truss rods stronger than others on the market.

Irrigation Control Panel

Fused disconnect in automatic panel rated 600V at 30 amps. Forward / reverse contactors rated 600v at 30 amps. Our main control also supports Running direction.

Pipe Coupling (Aluminum)

This flexible joint design of our aluminum pipe coupling supports all the strength of the pivot and makes the pivot flexible enough to adapt to varied terrain. Because the aluminum coupler will break when the spans are not in proper alignment, causing water to leak and the water pressure to drop ..

Non-Pneumatic Pivot Irrigation Tire (Rubber)

We provide three different options for our rubber pivot tires:

• 11.2×38: Good clearance and flotation.

• 14.9×24: Tubeless tire 4ply, for heavier and longer spans.

• 16.9×24: For longer spans more flotation

Sprinkler Parts (Nelson Sprinkler 3000 Series)

We provide three different options for our rubber pivot tires:

• 11.2×38: Good clearance and flotation.

• 14.9×24: Tubeless tire 4ply, for heavier and longer spans.

• 16.9×24: For longer spans more flotation

Sprinkler Parts (Senninger Sprinkler UP3)

We carry a wide variety of sprinklers and sprinkler parts so that we can customize your system to suit your needs. Flow rate, crop height, and spray pattern - let us help you build the system that suits you best.

End Gun (Pivot)

Slow, steady and uniform forward and reverse drive action; Pivot gun doesn’t require solenoid when used in conjunction with a booster pump.
Heavy-duty construction ensures long service life and reliability;

Coupling Assembly (C-X Coupler U-Joint)

Units come pre-assembled. Universal design. UV stabilized Urethane puck